There are a lot of details and considerations that go into building up an Internet of Things (IoT) infrastructure that can scale. Most immediately think of scaling their servers – using bigger machines or a cluster of smaller machines – but there’s much more to consider to meet an increasing demand. For instance, as the number of devices increases so does the need for a streamlined way to maintain and troubleshoot them. Tools must be developed so that system administrators can do routine tasks with thousands of devices. Monitoring must scale when the number of devices grows, so that there’s a way to alert on and investigate impending issues, faulty hardware or even malicious attacks on your infrastructure. And all along the way a developer is faced with a litany of small decisions that may, unbeknownst to them, make future growth easier or much harder. The following are a few ways that IoT infrastructures can be made to scale.
Web and Mobile Interfaces that Scale
Web interfaces are typically the place many start when they think about building a scalable IoT infrastructure and for good reason. The web and mobile interfaces to an IoT solution are most visible to end users and show their stress more readily to those who use it. One particular approach to building web and mobile apps is to use a common Application Programmers Interface (or API) for both. This removes redundant code from individual solutions and makes it easier to maintain, test and add features. Separating the API from the rest of the web application, often done through the use of Single Page Applications (SPA), then will give system architects the ability to scale the high-load portions of the site independently. Because the API is under load from both web app and mobile app users it will likely be the first place a load balancer and parallel servers will be required. In turn, developers must consider the many facets of a growing number of servers, such as how to federate login functionality and the use of session management over multiple servers.
Asynchronous Data Processing with Web Workers
IoT infrastructures naturally crunch a lot of data – armies of end devices work around the clock to send data up to the cloud. But making use of that information can be a task, and a computationally intensive task at that. Additionally, there are situation where a user may wish to generate certain reports or perform some sort of computations on the data present. A typical request and wait approach to building a web application will fall short if the user’s request is resource intensive. Not only will web servers get overloaded at scale, but expecting end users to simply sit and stare at a spinner in their browser makes for a terrible User Experience (UX).
Scalable IoT infrastructures offload this data crunching and intensive work to specialized servers sometimes called web workers. The number of servers in this pool can dynamically grow, but their sole purpose in life is to be constantly doing the hard work. To work well, they would work from a single queue of tasks that need to be done. As a new request comes in or a new set of data is stored, the computational work to be done would be loaded into the queue. As a web worker comes available this work would be completed and the resultant data would be made available. Because the work isn’t completed on-demand, but through a queue system, it is inherently asynchronous and easily scalable.
Synchronous and Asynchronous IoT Device Communication
Similarly, scalable IoT infrastructures are more scalable if the communication stack from the end devices to the cloud is also asynchronous. For example, if the servers that receive data from IoT end points must immediately accept, process and respond, it quickly can become a brittle part of the system. What happens when a large number of devices are connected to the net simultaneously or they all happen to send data up stream at the same moment? Servers can be overwhelmed, data can be lost and services break down. However, if communications paths are made asynchronous they can more easily scale to increasing data. This can be accomplished by using communication protocols that break up the sending and receiving processes, such as MQTT or message queues.
If you have built an infrastructure like this, you also know that there are times when you need more synchronous behavior. For instance, turning on an IoT end device like a lamp cannot be something that happens asynchronously “at some time in the future.” Or for a more industrial example, slow-to-execute commands sent to remote factory equipment could result in lost revenue, especially when added up over the course of months or years. With this in mind, it may make sense to add more immediate or synchronous-like communication paths next to the asynchronous ones. They may not be truly synchronous, but they can be made to mimic this through low-latency, highly-durable channels and protocols. And the data that can quickly swell and overwhelm an infrastructure, such as telemetry data, can be kept on its own, asynchronous path.
Maintaining Devices at Scale
Building and maintaining the firmware on a few prototype or beta IoT end devices can be a time consuming proposition. What version of firmware did you put on this one again? Why is this device not sending data? Maintaining a few devices and hundreds of devices are entirely different things. Not to mention thousands or even hundreds of thousands of devices. In this sort of IoT infrastructure maintenance must increasingly become an automated process and tools must evolve.
Part of this process of managing a large number of devices is bringing them all online quickly and efficiently. It’s important that each device is uniquely identified and authenticated but also that they are immediately allowed to securely interact with the rest of the infrastructure before being fully provisioned – two requirements that are often at odds. With careful planning and the use of modern cryptography this is achievable but must be considered before going into full production.
Lastly, when building an infrastructure that scales, it is quite beneficial to consider what is often called “fog computing.” Fog computing is a term that applies to IoT systems where computational work is done at the edge or intermediate stages (like internet gateways) as opposed to a more traditional model where the work is done by a central cluster of servers or cloud services. And why not? When there is computational work to be done and excess computational resources at the edge, it seems natural to process more data there. It also has the natural quality that it scales with the computation burden of the infrastructure – more IoT devices means more data but also more computational resources. Taking this into consideration early on in the design of an IoT infrastructure, through the selection of appropriately sized hardware and the enablement of Over-the-Air (OTA) updates, will provide developers and maintainers the needed capability to successfully scale the operation when its needed.
Build It, Then Scale It
Designing an infrastructure that can grow well and increase capacity will help ensure the success of the business that is built upon it. No doubt it’s easier to build this into a solution from the start than to make big changes later on but, don’t let this intimidate you. A working product is always better than the concept for a perfect product that doesn’t exist. As long as growth is manageable or you have an expert technology partner who can guide you through to the next stage, even a system’s scalability can scale.
Latest posts by Eric Bigoness (see all)
- Practical Cryptography for the Internet of Things - October 25, 2018
- 3 Simple Ways to Secure Your IoT - October 25, 2018
- Build a Reliable and Connected IoT System that Scales - October 25, 2018